If you are looking for an installer, call the toll-free number above.

NOTICE TO INSTALLER:

Kaleidoscape Carpet TileTM is manufactured with TractionBacTM, which gives them a high-friction component so that traditional wet adhesives are NOT required. When the tiles are shipped, they are gathered back-to-back to preserve TractionBacTM's tacky characteristic. Do not peel carpet pairs apart until ready to install.

Surface Preparation:

Whether the subfloor is concrete or wood, make sure it is clean, dry and free of debris.

Installation:

Using the arrows on the back of each tile as a guide, assemble tiles with rotations according to the specifications provided by the designer because THE OVERALL DESIGN OF THE FLOOR COVER DEPENDS ON IT.

If the installers do not follow the specified directions, you can revise the overall design to coordinate with the plans by simply rotating tiles as needed. Recall that NO ADHESIVES ARE REQUIRED for this product.

Identify any design traits like Compositions or Patterns (see Design Professionals) and begin laying tiles from the center of the room or defined focal points first to assure proper symmetry as specified. If a pattern is specified but you were not furnished with the assembly instructions, come back to this website and go to Wall 2 Wall Carpet Tiles, select the tile style, then click Patterns to locate it. Download and print the pdf.

Tools Required:

If it is necessary to cut tiles, use a utility knive (or better) with a relatively new blade and a straight edge to assure clean lines.

Assistance:

If it is in the budget, or specified by the designer, subcontract Binvetec to install or supervise the process in order to assure proper assembly. See contact info at top of page.